.. Class Doc file

class cobra.model.vz.Entry
==========================
.. class:: cobra.model.vz.Entry

A filter entry is a combination of network traffic classification properties.

    Containers:
      * :class:`cobra.model.vz.Filter`

    Containment:
      * :class:`cobra.model.fault.Delegate`

    Properties:
      - applyToFrag : Match only packet fragments. When enabled the rule applies to any fragments with offset  greater than 0 (all fragments except first). When disabled it applies to all packets (including all fragments)

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - arpOpc : The open peripheral codes for the address resolution protocol.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - childAction : Delete or ignore. For internal use only.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: False
          + isImplicit: True

      - dFromPort : The end of the destination port range. The end of the port range is determined by the server type.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - dToPort : The start of the destination port range. The port range is determined by the server type.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - descr : The description of a filter entry. The description can be up to 128 alphanumeric characters.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - dn : A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

          + isNaming: False
          + isCreateOnly: True
          + isConfig: False
          + isImplicit: True

      - etherT : The EtherType of the filter entry.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - icmpv4T : 

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - icmpv6T : 

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - lcOwn : A value that indicates how this object was created. For internal use only.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: False
          + isImplicit: True

      - matchDscp : Mo doc not defined in techpub!!!

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - modTs : The time when this object was last modified.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: False
          + isImplicit: True

      - name : The name of a filter entry. This name can be up to 64 alphanumeric characters. Note that you cannot change this name after the object has been saved.

          + isNaming: True
          + isCreateOnly: True
          + isConfig: True
          + isImplicit: False

      - prot : The level 3 IP protocol.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - rn : Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

          + isNaming: False
          + isCreateOnly: True
          + isConfig: False
          + isImplicit: True

      - sFromPort : The start of the source port range. The start of the port range is determined by the server type.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - sToPort : The end of the source port range. The end of the port range is determined by the server type.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - stateful : Specifies if the entry is stateful. When this option is enabled, any traffic coming from the provider back to the consumer will always have to have the ACK bit set in the packet or else the packets will be dropped. 

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - status : The upgrade status. This property is for internal use only.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: False
          + isImplicit: True

      - tcpRules : The TCP flags of the filter entry.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: True
          + isImplicit: False

      - uid : A unique identifier for this object.

          + isNaming: False
          + isCreateOnly: False
          + isConfig: False
          + isImplicit: True