class cobra.model.l3.Inst¶
-
class
cobra.model.l3.Inst¶
The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.
- Containers:
- Containment:
- Properties:
adminState : The configured state of the infra VRF. When the state is down, no L3 traffic may flow in that VRF.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
bgpRd : The route-distinguisher for a VRF. The BGP is an L3 protocol used to learn routes, and the route-distinguisher helps the BGP learn routes in a specific VRF. The BGP can be run for multiple VRFs in a router, and because VRFs allow overlapping IP addresses between tenants, the BGP can get the same route (IP address) for two VRFs. The BGP uses the route distinguisher config to distinguish the routes received in the BGP packets from one VRF to another. Note that this is only applicable when multi-protocol BGP is enabled for a VRF.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
bgpRdDisp :
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
childAction : Delete or ignore. For internal use only.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
createTs : The VRF creation time. This is a runtime field set internally by the iNXOS when a VRF is created on a switch. This can be useful for debugging purposes.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
dn : A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
- isNaming: False
- isCreateOnly: True
- isConfig: False
- isImplicit: True
encap : The VXLAN VNID assigned to the infra VRF. It is used to carry L3 traffic originating in the VRF.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
gsdbCtx : The value of a GSDB (global shared database) context associated with a VRF at any given time. It is set to a non-zero value when a GSDB update is in progress for the VRF such as a change in the VRF admin state.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
id : The ID is a unique number allocated by the iNXOS for each infra VRF. The infra VRF is created for the iNXOS fabric infra. All communications between fabric elements, such as spine, leaf, and vleaf take place in the infra VRF.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
l3vmCfgFailedBmp :
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
l3vmCfgFailedTs :
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
l3vmCfgState :
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
lastChgdTs : last state change time
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
lcOwn : Indicates how this object was created.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
modTs : The time when this object was last modified.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
monPolDn : The monitoring policy for the Layer 3 instance object.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
name : The Layer 3 instance name.
- isNaming: True
- isCreateOnly: True
- isConfig: True
- isImplicit: False
oldOperStQual : old oper state reason
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
operStQual : The operation state qualifier. This specifies the reason for the operation state.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
operState : The operational state of the infra VRF. This is the runtime state set by the iNXOS process
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
oui : The organizationally unique ID part of the VPN-ID that belongs to a configured VRF.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
pending : The operation status. This indicates whether the last update operation is still pending. For example, this flag will be set to true while a VRF is undergoing an admin state change.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
prtclBmp : The protocols in a VRF. This indicates different L3 protocols, such as BGP, OSPF, and ISIS, that are enabled in a VRF.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
resourceId :
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
rn : Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
- isNaming: False
- isCreateOnly: True
- isConfig: False
- isImplicit: True
scope : The scope of the context. The scope identifies the classId pool and all the endpoint group/bridge domain classIds belonging to this context that need to be allocated from this pool.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
secLbl :
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
status : The upgrade status. This property is for internal use only.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: True
v4TibId : The IPv4 table ID.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v4TibName : The IPv4 table name. The name can be up to 64 alphanumeric characters. Note that each VRF contains tables corresponding to different address family types (iNXOS supports two address-families: IPv4 and IPv6). Each table in turn translates into a hardware resource, which is used in the ASIC to distinguish an address in VRF from same address in another VRF.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v4TibOldOperStQual : ipv4 table old oper state reason
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v4TibOperStQual : The IPv4 table operational state qualifier. This specifies the reason for the operational state.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v4TibOperState : The operational state of the ipv4 address table. This is internally set by iNXOS.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v4TibPending : The IPv4 pending operation status. Determines if an operation status is pending
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v4TibValid : The validity indicator for the IPv4 table.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v6TibId : The unique identifier assigned to a table for the IPv6 address family. This is internally allocated by iNXOS.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v6TibName : The IPv6 table name. The name can be up to 64 alphanumeric characters.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v6TibOldOperStQual : ipv6 table old oper state reason
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v6TibOperStQual : The IPv6 table operational state qualifier. This specifies the reason for the operation state.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v6TibOperState : The operational state of the IPv6 address table. This is internally set by iNXOS.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v6TibPending : The IPv6 pending operation status. This indicates whether the last update operation is still pending. For example, this flag will be set to true when table is undergoing a state change.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
v6TibValid : The validity indicator for the IPv6 table.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False
vpnId : The ID part of the VPN-ID belonging to a configured VRF.
- isNaming: False
- isCreateOnly: False
- isConfig: False
- isImplicit: False