class cobra.model.vpc.If

class cobra.model.vpc.If

The vPC interfaces information enables links that are physically connected to two different Fabric devices to appear as a single port channel by a third device. The third device can be a switch, server, or any other networking device that supports port channels. A vPC can provide Layer 2 multipathing, which allows you to create redundancy and increase bisectional bandwidth by enabling multiple parallel paths between nodes and allowing load balancing traffic.

Containers:

• cobra.model.vpc.Dom

Containment:

• cobra.model.fault.Inst
• cobra.model.vpc.AppParams
• cobra.model.fault.Counts
• cobra.model.health.Inst
• cobra.model.vpc.RsVpcConf

Properties:

• accBndlGrpDn : Mo doc not defined in techpub!!!

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• cfgdAccessVlan : The vPC interface’s configured access VLAN.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• cfgdTrunkVlans : The vPC interface’s configured trunk VLANs. A trunk port can have two or more VLANs configured on the interface; it can carry traffic for several VLANs simultaneously.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• cfgdVlans : The configured VLANs of the interface.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• childAction : Delete or ignore. For internal use only.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• compatQual : Compatibility reason code

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• compatQualStr : Compatibility reason code string

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• compatSt : Compatibility status

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• descr : The description of this configuration item.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: True
  • isImplicit: False

• dn : A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

  • isNaming: False
  • isCreateOnly: True
  • isConfig: False
  • isImplicit: True

• fabricPathDn :

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• id : The vPC interface identifier.

  • isNaming: True
  • isCreateOnly: True
  • isConfig: True
  • isImplicit: False

• lcOwn : Indicates how this object was created.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• localOperSt : The local operational status of the vPC interface.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• modTs : The time when this object was last modified.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• monPolDn : The monitoring policy attached to this observable object.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• name : The name of the object.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• pcMode :

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• peerCfgdVlans : The VLANs configured by the peer for the vPC interface.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• peerUpVlans : The VLANs active on the peer for the vPC interface.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• remoteOperSt : The peer’s operational status for the vPC interface.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• rn : Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

  • isNaming: False
  • isCreateOnly: True
  • isConfig: False
  • isImplicit: True

• status : The upgrade status. This property is for internal use only.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: True

• suspVlans : The suspended VLANs of the interface. You can configure VLANs to be in the active state, in which the VLANs pass traffic, or the suspended state, in which the VLANs do not pass traffic. By default, the VLANs are in the active state and pass traffic. Note that even if a VLAN is configured to be active, it can be operationally suspended if it has not been configured on the peer switch.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• upVlans : The active VLANs of the interface. You can configure VLANs to be in the active state, in which the VLANs pass traffic, or the suspended state, in which the VLANs do not pass traffic. By default, the VLANs are in the active state and pass traffic. Note that even if a VLAN is configured to be active, it can be operationally suspended if it has not been configured on the peer switch.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False

• usage : The usage of the port. This property shows how the port is used.

  • isNaming: False
  • isCreateOnly: False
  • isConfig: False
  • isImplicit: False